Colourlife
Colourlife Coating
| COLOURLIFE | PPGI | PPGL |
| Al-Zinc Coating (gsm) | Z-80 | AZ-70- 150 |
| Top Coating μ | 15 | 20 |
| Back Coating μ | 6 | 6 |
Product Specifications
| Coil Form | PPGI/PPGL |
| Thickness (mm) | 0.15 – 1.2 |
| Width (mm) | 900 – 1450 |
| Coil Weight (mt) | 2-10 (4 mt with guard film) |
| Substrate | Al-Zinc Alloy Steel/ Galvanized |
| Al-Zinc Alloy Steel (gsm) | AZ -70 – 150 |
| Zinc (gsm) | Z- 80 |
| Hardness | 350 mpa – 550 mpa |
| Guard Film | 35μ |
| Standards | ISO 9001 : 2015 Certified |
Paint Coating
Colourlife products have time and again proved their superiority over competitors by giving the roofs a longer life. It’s 120 GSM zinc coating gives a better look as well as a longer life to the roofs. It’s top and bottom coat using advanced technology helps the colour not to peel off during weather changes.
Profile Design
Major Application Areas
Factory Shades
Bus Stand Shades
False Ceiling
False Ceiling
Warehouses & Cold Storages
Warehouses & Cold Storages
Industrial Roofing & Cladding
Residential Roofing & Cladding
An Edge over Others
01
Authenticity & Genuineness
02
Superior product quality
03
Saving through better yield
04
Wide range of grades, thickness & widths
05
Quick response & prompt redressal of problem.
06
Opportunity to differentiate your product on the basis of raw material source
07
Better Value for your products
08
Prompt delivery at doorstep
Types of Accessories
Gutter
Our box gutters are usually rectangular in shape. These flashings collect rainwater and allow it to flow out of your building. Water is drained via a Down Pipe and Nozzle from the Gutter.
Apron Flashing
This flashing is used at the juncture where your sloped roof meets a chimney, vertical wall or a steeper sloped roof.
Ridge
Ridging covers the gap between two sheets in a roof’s ridgeline. A roof “ridge” is the uppermost peak where opposing planes meet.
Corner Trim
Used at the end of a run of a sheet to trim and seal off the edge of the roof.
L Flashing
Also referred to as “step flashing”. Installed where your roof and sidewall meet to prevent water penetration.
Valley Gutter
Used at the internal angle of intersection of two roofing sheets or at the slope of the roof and a wall to prevent leakage.
Barge Cap
Barge capping usually refers to flashings that secure the ends of your roof and walls. This is done a waterproofing deterrent.
Crimp Material
Crimping is the process of making a curved profile sheet. It adds to a roof’s aesthetic. Our highly qualified team uses the latest technology to do full or partial crimping depending on your requirements. Crimp accessories are also available.
Shade card
RAL 1003
Signal Yellow
RAL 1023
Traffic Yellow
RAL 2009
Traffic Orange
RAL 2010
Signal Orange
RAL 3020
Traffic Red
Seco Red
Brick Red
RAL 4008
Signal Violet
RAL 5005
Signal Blue
RAL 5012
Light Blue
RAL 5017
Traffic Blue
Pepsi Blue
Nuvo Blue
Caulifield Green
Environmental Green
RAL 7042
Traffic Grey
RAL 8017
Chocolate Brown
RAL 9002
Grey White
RAL 9003
Signal White
RAL 9010
Pure White
Shade card
RAL 1003
Signal Yellow
RAL 1023
Traffic Yellow
RAL 2009
Traffic Orange
RAL 2010
Signal Orange
RAL 3020
Traffic Red
Seco Red
Brick Red
RAL 4008
Signal Violet
RAL 5005
Signal Blue
RAL 5012
Light Blue
RAL 5017
Traffic Blue
Pepsi Blue
Nuvo Blue
Caulifield Green
Environmental Green
RAL 7042
Traffic Grey
RAL 8017
Chocolate Brown
RAL 9002
Grey White
RAL 9003
Signal White
RAL 9010
Pure White